Where are the transmission fill ports and fluid level checks for a 2003 Ford Explorer

QUESTION:

Where are the transmission fill ports and fluid level checks for a 2003 ford explorer. i dropped the pan and come to find out that i do not have a normal fill port. Need to put the transmission fluid back in the vehicle to get it on the road. Tools and any other key facts would be greatly appreciated. Already Tried: Looking for fill ports for the transmission fluid and really could not distinguish where to put the transmission fluid. have had other " good car guys" look at it an they were just as befuddled. need to know how to so i can get my car back on the road.

ANSWER:

There is a special tool that screws into the "drain plug in the bottom of the pan. But if you can rig up something to squirt the fluid into the pan from the bottom then you do not need the tool. The easiest way is to put as much fluid that you can in the pan itself before bolting the pan back up. This makes the job a hell of a lot easier. Then start the truck let it get pretty warm and open the plug on the bottom of the pan(just the TX-30 torx bit screw) and when fluid just barely flows out of the hole then you are going to be at approx the correct level.