Search Auto-Repair-Questions

Friday, September 15, 2006

Hyundai Scoupe Clucth Cabe Adjustment

The Clutch cable information you requested. Pedal Height Adjustment : Measure the pedal height fromt the top of the pedal pad to the closest point on the floor. The distance should be 7 in.(178mm). Losen the clutch switch locknut and move the pedal stop bolt. Then tighten the lock nut. Clevis Pin Play Adjustment : Clevis pin play is measured at the pedal while observing the pin. Play should be 0.04-0.12in (1-3 mm). If not, loosen the lock nut and turn the pushrod, as required. Tighten the locknut. Free Play Adjustment for Cable : Slightly pull the cable away from the firewall. Turn the adjusting wheel on the cable until the play between the wheel and the cable retainer is 0.20-0.25 in. ( 5-6 mm). Release the cable and make sure the end of the tension spring engages the adjusting wheel, so the wheel won't turn. Check the clutch pedal free-play. Free-play should be 0.8-1.2 in.(20-30 mm). If it is outside specification, adjust it by means of the adjusting wheel on the cable. Free Play Adjustment for Hydraulic : Check this adjustment after checking pedal height and clevis play. Free-play should be 0.24-0.51 in.(6-13 mm). If not, there is air in the system which must be bled. If air persists, there ia a leak and system must be repaired.

No comments:

Post a Comment